Developing Games using RingRayLib

In this chapter we will learn how to use the RingRayLib extension.

Introduction

RingRayLib is an extension for the RayLib game programming library.

Also RayGUI functions are supported by this extension.

Basic Window

load "raylib.ring"

screenWidth     = 800
screenHeight    = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - basic window")

SetTargetFPS(60)

while !WindowShouldClose()
        BeginDrawing()
        ClearBackground(RED)
        DrawText("Congrats! You created your first window!", 190, 200, 20, WHITE)
        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Input Keys

load "raylib.ring"

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - keyboard input")
ballPosition = Vector2(screenWidth/2, screenHeight/2)
SetTargetFPS(60)

while !WindowShouldClose()
                if IsKeyDown(KEY_RIGHT) ballPosition.x += 2 ok
                if IsKeyDown(KEY_LEFT)  ballPosition.x -= 2 ok
                if IsKeyDown(KEY_UP)    ballPosition.y -= 2 ok
                if IsKeyDown(KEY_DOWN)  ballPosition.y += 2 ok
                BeginDrawing()
                ClearBackground(RAYWHITE)
                DrawText("move the ball with arrow keys", 10, 10, 20, DARKGRAY)
                DrawCircleV(ballPosition, 50, MAROON)
                EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Input Mouse

load "raylib.ring"

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - mouse input")

ballPosition    = Vector2(100, 100)
ballColor       = DARKBLUE

SetTargetFPS(60)

while ! WindowShouldClose()

                ballPosition = GetMousePosition()

                if IsMouseButtonPressed(MOUSE_LEFT_BUTTON)
                        ballColor = MAROON
                but IsMouseButtonPressed(MOUSE_MIDDLE_BUTTON)
                        ballColor = LIME
                but IsMouseButtonPressed(MOUSE_RIGHT_BUTTON)
                        ballColor = DARKBLUE
                ok

                BeginDrawing()
                ClearBackground(BLACK)
                DrawCircleV(ballPosition, 40, ballColor)
                DrawText("move ball with mouse and click mouse button to change color",
                         10, 10, 20, YELLOW)
                EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

3D Camera

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - 3d camera mode")

camera = Camera3D(
        0, 10, 10,              // Camera position
        0, 0, 0 ,               // Camera looking at point
        0, 1, 0,                // Camera up vector (rotation towards target)
        45,                     // Camera field-of-view Y
        CAMERA_PERSPECTIVE)     // Camera mode type

cubePosition = Vector3(0, 0, 0)

SetTargetFPS(60)

while !WindowShouldClose()

                BeginDrawing()

                ClearBackground(RAYWHITE)

                BeginMode3D(camera)

                DrawCube(cubePosition, 2, 2, 2, RED)
                DrawCubeWires(cubePosition, 2, 2, 2, MAROON)

                DrawGrid(10, 1)

                EndMode3D()

                DrawText("Welcome to the third dimension!", 10, 40, 20, DARKGRAY)

                DrawFPS(10, 10)

                EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

3D Camera Free

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - 3d camera free")

camera = Camera3D(
        10, 10, 10,             // Camera position
        0, 0, 0 ,               // Camera looking at point
        0, 1, 0,                // Camera up vector (rotation towards target)
        45,                     // Camera field-of-view Y
        CAMERA_PERSPECTIVE)     // Camera mode type

cubePosition = Vector3(0, 0, 0)

SetCameraMode(camera, CAMERA_FREE)              // Set a free camera mode

SetTargetFPS(60)

while !WindowShouldClose()

                UpdateCamera(camera)

                if IsKeyDown("Z") camera.target = Vector3( 0, 0, 0) ok

                BeginDrawing()

                ClearBackground(RAYWHITE)

                BeginMode3D(camera)

                DrawCube(cubePosition, 2, 2, 2, RED)
                DrawCubeWires(cubePosition, 2, 2, 2, MAROON)

                DrawGrid(10, 1)

                EndMode3D()

                DrawRectangle( 10, 10, 320, 133, Fade(SKYBLUE, 0.5))
                DrawRectangleLines( 10, 10, 320, 133, BLUE)

                DrawText("Free camera default controls:", 20, 20, 10, BLACK)
                DrawText("- Mouse Wheel to Zoom in-out", 40, 40, 10, DARKGRAY)
                DrawText("- Mouse Wheel Pressed to Pan", 40, 60, 10, DARKGRAY)
                DrawText("- Alt + Mouse Wheel Pressed to Rotate", 40, 80, 10, DARKGRAY)
                DrawText("- Alt + Ctrl + Mouse Wheel Pressed for Smooth Zoom",
                         40, 100, 10, DARKGRAY)
                DrawText("- Z to zoom to (0, 0, 0)", 40, 120, 10, DARKGRAY)

                EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Mouse Wheel

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - input mouse wheel")

boxPositionY = screenHeight/2 - 40
scrollSpeed = 4

SetTargetFPS(60)

while !WindowShouldClose()
        boxPositionY -= (GetMouseWheelMove()*scrollSpeed)

        BeginDrawing()

        ClearBackground(RAYWHITE)

        DrawRectangle(screenWidth/2 - 40, boxPositionY, 80, 80, MAROON)

        DrawText("Use mouse wheel to move the cube up and down!", 10, 10, 20, GRAY)
        DrawText("Box position Y: "+boxPositionY, 10, 40, 20, LIGHTGRAY)

        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Input Multi-touch

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - input multitouch")

ballPosition = Vector2(-100, -100)
ballColor = BEIGE

touchCounter = 0
touchPosition = vector2(0,0)

MAX_TOUCH_POINTS = 5

SetTargetFPS(60)

while !WindowShouldClose()

        ballPosition = GetMousePosition()

        ballColor = BEIGE

        if IsMouseButtonDown(MOUSE_LEFT_BUTTON) ballColor = MAROON ok
        if IsMouseButtonDown(MOUSE_MIDDLE_BUTTON) ballColor = LIME ok
        if IsMouseButtonDown(MOUSE_RIGHT_BUTTON) ballColor = DARKBLUE ok

        if IsMouseButtonPressed(MOUSE_LEFT_BUTTON) touchCounter = 10 ok
        if IsMouseButtonPressed(MOUSE_MIDDLE_BUTTON) touchCounter = 10 ok
        if IsMouseButtonPressed(MOUSE_RIGHT_BUTTON) touchCounter = 10 ok

        if touchCounter > 0 touchCounter-- ok

        BeginDrawing()

        ClearBackground(RAYWHITE)

        for i = 0 to MAX_TOUCH_POINTS-1
                touchPosition = GetTouchPosition(i)

                if touchPosition.x >= 0 && touchPosition.y >= 0
                        DrawCircleV(touchPosition, 34, ORANGE)
                        DrawText(""+ i, touchPosition.x - 10,
                                touchPosition.y - 70, 40, BLACK)
                ok
        next

        DrawCircleV(ballPosition, 30 + (touchCounter*3), ballColor)

        DrawText("move ball with mouse and click mouse button to change color",
                         10, 10, 20, DARKGRAY)
        DrawText("touch the screen at multiple locations to get multiple balls",
                         10, 30, 20, DARKGRAY)

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Camera First Person

load "raylib.ring"

MAX_COLUMNS = 20

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - 3d camera first person")

camera = Camera3d(
        4, 2, 4,
        0, 1, 0,
        0, 1, 0,
        60,
        CAMERA_PERSPECTIVE
)

heights = list(MAX_COLUMNS)
positions = list(MAX_COLUMNS)
for item in positions item = vector3(0,0,0) next
colors = list(MAX_COLUMNS)
for item in colors item = BLACK next

for i = 1 to  MAX_COLUMNS
        heights[i] = GetRandomValue(1, 12)
        positions[i] = Vector3(GetRandomValue(-15, 15),
                         heights[i]/2, GetRandomValue(-15, 15) )
        colors[i] = RAYLibColor(GetRandomValue(20, 255),
                         GetRandomValue(10, 55), 30, 255 )
next

SetCameraMode(camera, CAMERA_FIRST_PERSON)

SetTargetFPS(60)

while !WindowShouldClose()

        UpdateCamera(camera)
        BeginDrawing()

        ClearBackground(RAYWHITE)

        BeginMode3D(camera)

        DrawPlane(Vector3( 0, 0, 0 ), Vector2(32, 32 ), LIGHTGRAY) // Draw ground
        DrawCube(Vector3( -16, 2.5, 0 ), 1, 5, 32, BLUE)     // Draw a blue wall
        DrawCube(Vector3( 16, 2.5, 0 ), 1, 5, 32, LIME)      // Draw a green wall
        DrawCube(Vector3( 0, 2.5, 16 ), 32, 5, 1, GOLD)      // Draw a yellow wall

        for i = 1 to  MAX_COLUMNS
                DrawCube(positions[i], 2, heights[i], 2, colors[i])
                DrawCubeWires(positions[i], 2, heights[i], 2, MAROON)
        next

        EndMode3D()

        DrawRectangle( 10, 10, 220, 70, Fade(SKYBLUE, 0.5f))
        DrawRectangleLines( 10, 10, 220, 70, BLUE)

        DrawText("First person camera default controls:", 20, 20, 10, BLACK)
        DrawText("- Move with keys: W, A, S, D", 40, 40, 10, DARKGRAY)
        DrawText("- Mouse move to look around", 40, 60, 10, DARKGRAY)

        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

3D Picking

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [core] example - 3d picking")

camera = Camera3D(
        10, 10, 10,
        0, 0, 0 ,
        0, 1, 0 ,
        45,
        CAMERA_PERSPECTIVE
)

cubePosition = Vector3( 0, 1, 0 )
cubeSize = Vector3( 2, 2, 2 )

ray = Ray(0,0,0,0,0,0)

collision = false

SetCameraMode(camera, CAMERA_FREE)

SetTargetFPS(60)

while !WindowShouldClose()

        UpdateCamera(camera)

        if IsMouseButtonPressed(MOUSE_LEFT_BUTTON)
                if !collision
                        ray = GetMouseRay(GetMousePosition(), camera)
                        collision = CheckCollisionRayBox(ray,
                        BoundingBox( cubePosition.x - cubeSize.x/2,
                        cubePosition.y - cubeSize.y/2, cubePosition.z - cubeSize.z/2,
                        cubePosition.x + cubeSize.x/2, cubePosition.y + cubeSize.y/2,
                        cubePosition.z + cubeSize.z/2 ) )
                else collision = false
                ok
        ok

        BeginDrawing()

        ClearBackground(RAYWHITE)

        BeginMode3D(camera)

        if collision
                DrawCube(cubePosition, cubeSize.x, cubeSize.y, cubeSize.z, RED)
                DrawCubeWires(cubePosition, cubeSize.x, cubeSize.y, cubeSize.z, MAROON)

                DrawCubeWires(cubePosition, cubeSize.x + 0.2f,
                                cubeSize.y + 0.2f, cubeSize.z + 0.2f, GREEN)
        else
                DrawCube(cubePosition, cubeSize.x, cubeSize.y, cubeSize.z, GRAY)
                DrawCubeWires(cubePosition, cubeSize.x, cubeSize.y, cubeSize.z, DARKGRAY)
        ok

        DrawRay(ray, MAROON)
        DrawGrid(10, 1)

        EndMode3D()

        DrawText("Try selecting the box with mouse!", 240, 10, 20, DARKGRAY)

        if collision  DrawText("BOX SELECTED",
                (screenWidth - MeasureText("BOX SELECTED", 30)) / 2,
                screenHeight * 0.1f, 30, GREEN) ok

        DrawFPS(10, 10)

        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Full Screen

load "raylib.ring"

screenWidth     = 1024
screenHeight    = 768

InitWindow(screenWidth, screenHeight, "Full Screen")
ToggleFullScreen()

SetTargetFPS(60)

while !WindowShouldClose()
        BeginDrawing()
                ClearBackground(DARKBLUE)
                DrawText("Count from 1 to 10", 190, 200, 20, Yellow)
                for t = 1 to 10
                        DrawText("Number: " + t, 190, 200+(30*t), 20, WHITE)
                next
        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Two Cubes

load "raylib.ring"

screenWidth  = 800
screenHeight = 450
InitWindow(screenWidth, screenHeight, "raylib [core] example - Two Cubes")

camera = Camera3D(
        10, 10, 10,
        0, 0, 0 ,
        0, 1, 0 ,
        45,
        CAMERA_PERSPECTIVE
)

cubePosition1 = Vector3( 0, 1, 4 )
cubePosition2 = Vector3( 0, 1, -4 )
cubeSize = Vector3( 2, 2, 2 )

ray = Ray(0,0,0,0,0,0)

collision1 = false
collision2 = false

SetCameraMode(camera, CAMERA_FREE)

SetTargetFPS(60)

while !WindowShouldClose()

                UpdateCamera(camera)

                if IsMouseButtonPressed(MOUSE_LEFT_BUTTON)
                        if !collision1
                                ray = GetMouseRay(GetMousePosition(), camera)

                                collision1 = CheckCollisionRayBox(ray,
                                BoundingBox( cubePosition1.x -
                                cubeSize.x/2, cubePosition1.y - cubeSize.y/2,
                                cubePosition1.z - cubeSize.z/2,
                                cubePosition1.x + cubeSize.x/2,
                                cubePosition1.y + cubeSize.y/2,
                                cubePosition1.z + cubeSize.z/2 ) )
                        else
                                collision1 = false
                        ok
                        if  !collision2
                                ray = GetMouseRay(GetMousePosition(), camera)

                                collision2 = CheckCollisionRayBox(ray,
                                BoundingBox( cubePosition2.x -
                                cubeSize.x/2, cubePosition2.y - cubeSize.y/2,
                                cubePosition2.z - cubeSize.z/2,
                                cubePosition2.x + cubeSize.x/2,
                                cubePosition2.y + cubeSize.y/2,
                                cubePosition2.z + cubeSize.z/2 ) )
                        else
                                collision2 = false
                ok
        ok

                BeginDrawing()

                        ClearBackground(RAYWHITE)

                        BeginMode3D(camera)

                                 if collision1
                                        DrawCube(cubePosition1, cubeSize.x,
                                        cubeSize.y, cubeSize.z, RED)
                                        DrawCubeWires(cubePosition1, cubeSize.x,
                                        cubeSize.y, cubeSize.z, MAROON)

                                        DrawCubeWires(cubePosition1, cubeSize.x +
                                        0.2f, cubeSize.y + 0.2f,
                                        cubeSize.z + 0.2f, GREEN)
                                        collision1 = true
                                 else
                                        DrawCube(cubePosition1, cubeSize.x,
                                        cubeSize.y, cubeSize.z, GRAY)
                                        DrawCubeWires(cubePosition1, cubeSize.x,
                                        cubeSize.y, cubeSize.z, DARKGRAY)
                                        collision1 = false
                                 ok

                                 if collision2
                                        DrawCube(cubePosition2, cubeSize.x,
                                        cubeSize.y, cubeSize.z, RED)
                                        DrawCubeWires(cubePosition2, cubeSize.x,
                                        cubeSize.y, cubeSize.z, MAROON)

                                        DrawCubeWires(cubePosition2, cubeSize.x +
                                        0.2f, cubeSize.y + 0.2f,
                                        cubeSize.z + 0.2f, GREEN)
                                        collision2 = true
                                 else
                                        DrawCube(cubePosition2, cubeSize.x,
                                        cubeSize.y, cubeSize.z, GRAY)
                                        DrawCubeWires(cubePosition2, cubeSize.x,
                                        cubeSize.y, cubeSize.z, DARKGRAY)
                                        collision2 = false
                                 ok


                                DrawRay(ray, MAROON)
                                DrawGrid(10, 1)

                        EndMode3D()

                        DrawText("Try selecting the box with mouse!", 240, 10,
                                        20, DARKGRAY)

                        if collision1 or collision2
                                DrawText("BOX SELECTED",
                                (screenWidth - MeasureText("BOX SELECTED", 30)) / 2,
                                screenHeight * 0.1f, 30, GREEN)
                        ok

                        DrawFPS(10, 10)

                EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Basic Shapes

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [shapes] example - basic shapes drawing")

SetTargetFPS(60)

while !WindowShouldClose()

        BeginDrawing()

        ClearBackground(RAYWHITE)

        DrawText("some basic shapes available on raylib", 20, 20, 20, DARKGRAY)

        DrawCircle(screenWidth/4, 120, 35, DARKBLUE)

        DrawRectangle(screenWidth/4*2 - 60, 100, 120, 60, RED)
        DrawRectangleLines(screenWidth/4*2 - 40, 320, 80, 60, ORANGE)
        DrawRectangleGradientH(screenWidth/4*2 - 90, 170, 180, 130, MAROON, GOLD)

        DrawTriangle(Vector2(screenWidth/4*3, 80),
                                 Vector2(screenWidth/4*3 - 60, 150),
                                 Vector2(screenWidth/4*3 + 60, 150), VIOLET)

        DrawPoly(Vector2(screenWidth/4*3, 320), 6, 80, 0, BROWN)

        DrawCircleGradient(screenWidth/4, 220, 60, GREEN, SKYBLUE)

        DrawLine(18, 42, screenWidth - 18, 42, BLACK)
        DrawCircleLines(screenWidth/4, 340, 80, DARKBLUE)
        DrawTriangleLines(Vector2(screenWidth/4*3, 160),
                        Vector2(screenWidth/4*3 - 20, 230),
                        Vector2(screenWidth/4*3 + 20, 230), DARKBLUE)
        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Draw Ring

load "raylib.ring"

screenWidth = 800       screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [shapes] example - draw ring")

center = Vector2((GetScreenWidth() - 300)/2, GetScreenHeight()/2 )

innerRadius = 80        outerRadius = 190
startAngle = 0          endAngle = 360          segments = 0
drawRing = true         drawRingLines = false   drawCircleLines = false

SetTargetFPS(60)

while !WindowShouldClose()

        BeginDrawing()

        ClearBackground(RAYWHITE)

        DrawLine(500, 0, 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.6))
        DrawRectangle(500, 0, GetScreenWidth() - 500,
                         GetScreenHeight(), Fade(LIGHTGRAY, 0.3))

        if drawRing DrawRing(center, innerRadius, outerRadius,
                startAngle, endAngle, segments, Fade(MAROON, 0.3)) ok
        if drawRingLines DrawRingLines(center, innerRadius,
                outerRadius, startAngle, endAngle,
                 segments, Fade(BLACK, 0.4)) ok
        if drawCircleLines DrawCircleSectorLines(center, outerRadius,
                startAngle, endAngle, segments, Fade(BLACK, 0.4)) ok

        startAngle = GuiSliderBar(Rectangle( 600, 40, 120, 20 ),
                        "StartAngle", startAngle, -450, 450, true)
        endAngle = GuiSliderBar(Rectangle( 600, 70, 120, 20 ),
                        "EndAngle", endAngle, -450, 450, true)

        innerRadius = GuiSliderBar(Rectangle( 600, 140, 120, 20 ),
                        "InnerRadius", innerRadius, 0, 100, true)
        outerRadius = GuiSliderBar(Rectangle( 600, 170, 120, 20 ),
                        "OuterRadius", outerRadius, 0, 200, true)

        segments = GuiSliderBar(Rectangle( 600, 240, 120, 20 ),
                        "Segments", segments, 0, 100, true)

        drawRing = GuiCheckBox(Rectangle( 600, 320, 20, 20 ),
                        "Draw Ring", drawRing)
        drawRingLines = GuiCheckBox(Rectangle( 600, 350, 20, 20 ),
                        "Draw RingLines", drawRingLines)
        drawCircleLines = GuiCheckBox(Rectangle( 600, 380, 20, 20 ),
                        "Draw CircleLines", drawCircleLines)

        if segments >= 4
                DrawText("MODE: MANUAL", 600, 270, 10, MAROON)
        else
                DrawText("MODE: AUTO", 600, 270, 10, DARKGRAY)
        ok

        DrawFPS(10, 10)

        EndDrawing()
end

CloseWindow()

Screen Shot:

RayLib Example

Screen Shot (2):

RayLib Example

Bezier Lines

load "raylib.ring"

screenWidth = 800
screenHeight = 450

SetConfigFlags(FLAG_MSAA_4X_HINT)
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - cubic-bezier lines")

start = Vector2(0,0)
endvec = Vector2(screenWidth,screenHeight)

SetTargetFPS(60)

while (!WindowShouldClose())

        if (IsMouseButtonDown(MOUSE_LEFT_BUTTON))
                start = GetMousePosition()
        else (IsMouseButtonDown(MOUSE_RIGHT_BUTTON))
                  endvec = GetMousePosition()
        ok


        BeginDrawing()

        ClearBackground(RAYWHITE)
        DrawText("USE MOUSE LEFT-RIGHT CLICK to DEFINE LINE START and END POINTS",
                         15, 20, 20, GRAY)
        DrawLineBezier(start, endvec, 2.0, RED)

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Collision Area

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [shapes] example - collision area")

// Box A: Moving box
boxA = Rectangle( 10, GetScreenHeight()/2 - 50, 200, 100 )
boxASpeedX = 4

// Box B: Mouse moved box
boxB = Rectangle( GetScreenWidth()/2 - 30, GetScreenHeight()/2 - 30, 60, 60 )

boxCollision = GetCollisionRec(boxA, boxB)

boxCollision = Rectangle( 0,0,0,0 ) // Collision rectangle

screenUpperLimit = 40      // Top menu limits

pause = false             // Movement pause
collision = false         // Collision detection

SetTargetFPS(60)

while !WindowShouldClose()

        // Move box if not paused
        if (not pause) boxA.x += boxASpeedX ok

        // Bounce box on x screen limits
        if (((boxA.x + boxA.width) >= GetScreenWidth()) or (boxA.x <= 0))
                boxASpeedX = boxASpeedX*(-1) ok

        // Update player-controlled-box (box02)
        boxB.x = GetMouseX() - boxB.width/2
        boxB.y = GetMouseY() - boxB.height/2

        // Make sure Box B does not go out of move area limits
        if ((boxB.x + boxB.width) >= GetScreenWidth())
                boxB.x = GetScreenWidth() - boxB.width
        else (boxB.x <= 0) boxB.x = 0 ok

        if ((boxB.y + boxB.height) >= GetScreenHeight())
                boxB.y = GetScreenHeight() - boxB.height
        else (boxB.y <= screenUpperLimit) boxB.y = screenUpperLimit ok

        // Check boxes collision
        collision = CheckCollisionRecs(boxA, boxB)

        // Get collision rectangle (only on collision)
        if (collision) boxCollision = GetCollisionRec(boxA, boxB) ok

        // Pause Box A movement
        if (IsKeyPressed(KEY_SPACE)) pause = not pause ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                if collision = true
                   color = RED
                else
                   color = BLACK
                ok
                DrawRectangle(0, 0, screenWidth, screenUpperLimit, color)
                DrawRectangleRec(boxA, GOLD)

                boxB.x = GetMouseX() - boxB.width/2
                boxB.y = GetMouseY() - boxB.height/2
                collision = CheckCollisionRecs(boxA, boxB)
                DrawRectangleRec(boxB, BLUE)
                boxCollision = GetCollisionRec(boxA, boxB)

                if (collision) = true

                        // Draw collision area
                        DrawRectangleRec(boxCollision, LIME)

                        // Draw collision message
                        DrawText("COLLISION!", GetScreenWidth()/2 -
                                         MeasureText("COLLISION!", 20)/2,
                                        screenUpperLimit/2 - 10, 20, BLACK)

                        // Draw collision area
                        DrawText("Collision Area: " +
                                string(boxCollision.width*boxCollision.height),
                                GetScreenWidth()/2 - 100,
                                screenUpperLimit + 10, 20, BLACK)

                ok

                DrawFPS(10, 10)

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Following Eyes

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight, "raylib [shapes] example - following eyes")

scleraLeftPosition = Vector2( GetScreenWidth()/2 - 100, GetScreenHeight()/2 )
scleraRightPosition = Vector2( GetScreenWidth()/2 + 100, GetScreenHeight()/2 )
scleraRadius = 80

irisLeftPosition = Vector2( GetScreenWidth()/2 - 100, GetScreenHeight()/2 )
irisRightPosition = Vector2( GetScreenWidth()/2 + 100, GetScreenHeight()/2 )
irisRadius = 24

angle = 0.0
dx = 0.0 dy = 0.0 dxx = 0.0 dyy = 0.0

SetTargetFPS(60)

while !WindowShouldClose()

        irisLeftPosition = GetMousePosition()
        irisRightPosition = GetMousePosition()

        // Check not inside the left eye sclera
        if !CheckCollisionPointCircle(irisLeftPosition,
                scleraLeftPosition, scleraRadius - 20)
                dx = irisLeftPosition.x - scleraLeftPosition.x
                dy = irisLeftPosition.y - scleraLeftPosition.y

                angle = atan2(dy, dx)

                dxx = (scleraRadius - irisRadius)*cos(angle)
                dyy = (scleraRadius - irisRadius)*sin(angle)

                irisLeftPosition.x = scleraLeftPosition.x + dxx
                irisLeftPosition.y = scleraLeftPosition.y + dyy
        ok

        // Check not inside the right eye sclera
        if !CheckCollisionPointCircle(irisRightPosition,
                 scleraRightPosition, scleraRadius - 20)
                dx = irisRightPosition.x - scleraRightPosition.x
                dy = irisRightPosition.y - scleraRightPosition.y

                angle = atan2(dy, dx)

                dxx = (scleraRadius - irisRadius)*cos(angle)
                dyy = (scleraRadius - irisRadius)*sin(angle)

                irisRightPosition.x = scleraRightPosition.x + dxx
                irisRightPosition.y = scleraRightPosition.y + dyy
        ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawCircleV(scleraLeftPosition, scleraRadius, LIGHTGRAY)
                DrawCircleV(irisLeftPosition, irisRadius, BROWN)
                DrawCircleV(irisLeftPosition, 10, BLACK)

                DrawCircleV(scleraRightPosition, scleraRadius, LIGHTGRAY)
                DrawCircleV(irisRightPosition, irisRadius, DARKGREEN)
                DrawCircleV(irisRightPosition, 10, BLACK)

                DrawFPS(10, 10)

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Colors Palette

load "raylib.ring"

MAX_COLORS_COUNT = 21          // Number of colors available

screenWidth = 800
screenHeight = 450
colors = list(MAX_COLORS_COUNT)
colorNames = list(MAX_COLORS_COUNT)
colorsRecs = list(MAX_COLORS_COUNT)
colorState = list(MAX_COLORS_COUNT)

InitWindow(screenWidth, screenHeight, "raylib [shapes] example - colors palette")

colors = [
        DARKGRAY, MAROON, ORANGE, DARKGREEN, DARKBLUE, DARKPURPLE, DARKBROWN,
        GRAY, RED, GOLD, LIME, BLUE, VIOLET, BROWN, LIGHTGRAY, PINK, YELLOW,
        GREEN, SKYBLUE, PURPLE, BEIGE ]

colorNames = [
        "DARKGRAY", "MAROON", "ORANGE", "DARKGREEN", "DARKBLUE", "DARKPURPLE",
        "DARKBROWN", "GRAY", "RED", "GOLD", "LIME", "BLUE", "VIOLET", "BROWN",
        "LIGHTGRAY", "PINK", "YELLOW", "GREEN", "SKYBLUE", "PURPLE", "BEIGE" ]

for i = 1 to MAX_COLORS_COUNT
        colorsRecs[i] = new Rectangle(0,0,0,0)
next

for i = 1 to MAX_COLORS_COUNT
        colorState[i] = 0
next


// Fills colorsRecs data (for every rectangle)
for i = 1 to MAX_COLORS_COUNT
        colorsRecs[i].x = 20 + 100*((i-1)%7) + 10*((i-1)%7)
        colorsRecs[i].y = 80 + 100*floor((i-1)/7) + 10*floor((i-1)/7)
        colorsRecs[i].width = 100
        colorsRecs[i].height = 100
next

mousePoint = Vector2( 0.0, 0.0 )

SetTargetFPS(60)

// Main game loop
while !WindowShouldClose()

        mousePoint = GetMousePosition()

        for i = 1 to MAX_COLORS_COUNT
                if (CheckCollisionPointRec(mousePoint,
                         colorsRecs[i])) colorState[i] = 1
                else colorState[i] = 0 ok
        next

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawText("raylib colors palette", 28, 42, 20, BLACK)
                DrawText("press SPACE to see all colors",
                                 GetScreenWidth() - 180,
                                 GetScreenHeight() - 40, 10, GRAY)

                for i = 1 to MAX_COLORS_COUNT    // Draw all rectangles
                        if colorState[i]
                           cstate = 0.6
                        else
                           cstate = 1.0
                        ok

                        DrawRectangleRec(colorsRecs[i], Fade(colors[i], cstate))

                        if (IsKeyDown(KEY_SPACE) || colorState[i])
                                DrawRectangle(colorsRecs[i].x,
                                colorsRecs[i].y + colorsRecs[i].height - 26,
                                colorsRecs[i].width, 20, BLACK)
                                DrawRectangleLinesEx(colorsRecs[i], 6,
                                Fade(BLACK, 0.3f))
                                DrawText(colorNames[i], colorsRecs[i].x +
                                colorsRecs[i].width - MeasureText(colorNames[i],
                                10) - 12, colorsRecs[i].y +
                                colorsRecs[i].height - 20, 10, colors[i])
                        ok
                next

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Rectangle Scaling

load "raylib.ring"

MOUSE_SCALE_MARK_SIZE = 12

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
                 "raylib [shapes] example - rectangle scaling mouse")

rec = Rectangle( 100, 100, 200, 80 )

mousePosition = Vector2( 0,0 )

mouseScaleReady = false
mouseScaleMode = false

SetTargetFPS(60)

while !WindowShouldClose()

        mousePosition = GetMousePosition()

        if (CheckCollisionPointRec(mousePosition, rec) and
                CheckCollisionPointRec(mousePosition,
                 Rectangle(rec.x + rec.width - MOUSE_SCALE_MARK_SIZE,
                        rec.y + rec.height - MOUSE_SCALE_MARK_SIZE,
                         MOUSE_SCALE_MARK_SIZE, MOUSE_SCALE_MARK_SIZE )))
                mouseScaleReady = true
                if (IsMouseButtonPressed(MOUSE_LEFT_BUTTON))
                        mouseScaleMode = true ok
        else mouseScaleReady = false ok

        if (mouseScaleMode)

                mouseScaleReady = true

                rec.width = (mousePosition.x - rec.x)
                rec.height = (mousePosition.y - rec.y)

                if (rec.width < MOUSE_SCALE_MARK_SIZE)
                        rec.width = MOUSE_SCALE_MARK_SIZE ok
                if (rec.height < MOUSE_SCALE_MARK_SIZE)
                        rec.height = MOUSE_SCALE_MARK_SIZE ok

                if (IsMouseButtonReleased(MOUSE_LEFT_BUTTON))
                        mouseScaleMode = false ok
        ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawText("Scale rectangle dragging from bottom-right corner!",
                                 10, 10, 20, GRAY)

                DrawRectangleRec(rec, Fade(GREEN, 0.5f))

                if (mouseScaleReady)

                        DrawRectangleLinesEx(rec, 1, RED)
                        DrawTriangle(Vector2( rec.x + rec.width -
                        MOUSE_SCALE_MARK_SIZE, rec.y + rec.height ),
                        Vector2( rec.x + rec.width, rec.y + rec.height ),
                        Vector2( rec.x + rec.width, rec.y + rec.height -
                                 MOUSE_SCALE_MARK_SIZE ), RED)
                ok

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Music Playing

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
         "raylib [audio] example - music playing (streaming)")

InitAudioDevice()

music = LoadMusicStream("guitar_noodling.ogg")

PlayMusicStream(music)

timePlayed = 0.0
pause = false

SetTargetFPS(60)


while !WindowShouldClose()

        UpdateMusicStream(music)

        if IsKeyPressed(KEY_SPACE)
                StopMusicStream(music)
                PlayMusicStream(music)
        ok

        if IsKeyPressed(KEY_P)
                pause = !pause

                if pause
                        PauseMusicStream(music)
                else
                        ResumeMusicStream(music)
                ok
        ok

        timePlayed = GetMusicTimePlayed(music) / GetMusicTimeLength(music) *400

        if timePlayed > 400
                StopMusicStream(music)
        ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawText("MUSIC SHOULD BE PLAYING!", 255, 150, 20, LIGHTGRAY)

                         DrawRectangle(200, 200, 400, 12, LIGHTGRAY)
                         DrawRectangle(200, 200, timePlayed, 12, MAROON)
                DrawRectangleLines(200, 200, 400, 12, GRAY)

                DrawText("PRESS SPACE  TO RESTART MUSIC", 215, 250, 20, LIGHTGRAY)
                DrawText("PRESS P TO PAUSE/RESUME MUSIC", 208, 280, 20, LIGHTGRAY)

        EndDrawing()

end

UnloadMusicStream(music)

CloseAudioDevice()

CloseWindow()

Screen Shot:

RayLib Example

Sound Loading

load "raylib.ring"

screenWidth = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
                "raylib [audio] example - sound loading and playing")

InitAudioDevice()

fxWav = LoadSound("sound.wav")
fxOgg = LoadSound("tanatana.ogg")


SetTargetFPS(60)

while !WindowShouldClose()

        if IsKeyPressed(KEY_SPACE) PlaySound(fxWav)  ok
        if IsKeyPressed(KEY_ENTER) PlaySound(fxOgg)  ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawText("Press SPACE to PLAY the WAV sound!", 200, 180, 20, LIGHTGRAY)
                DrawText("Press ENTER to PLAY the OGG sound!", 200, 220, 20, LIGHTGRAY)

        EndDrawing()

end

UnloadSound(fxWav)
UnloadSound(fxOgg)

CloseAudioDevice()

CloseWindow()

Screen Shot:

RayLib Example

Image Drawing

load "raylib.ring"

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
                 "raylib [textures] example - image drawing")

cat = LoadImage("cat.png")

ImageCrop( cat,  Rectangle( 100, 10, 280, 380 ))
ImageFlipHorizontal( cat)
ImageResize( cat, 150, 200)

parrots = LoadImage("parrots.png")

ImageDraw( parrots, cat, Rectangle( 0, 0, cat.width, cat.height ),
                        Rectangle( 30, 40, cat.width*1.5, cat.height*1.5 ))
ImageCrop( parrots, Rectangle( 0, 50, parrots.width, parrots.height - 100 ))

UnloadImage(cat)

font = LoadFont("custom_jupiter_crash.png")

ImageDrawTextEx(parrots, Vector2( 300, 230 ), font,
                 "PARROTS & CAT", font.baseSize, -2, WHITE)
UnloadFont(font);

texture = LoadTextureFromImage(parrots)

UnloadImage(parrots)

SetTargetFPS(60)

while !WindowShouldClose()
        BeginDrawing()

        ClearBackground(RAYWHITE)

        DrawTexture(texture, screenWidth/2 - texture.width/2,
                screenHeight/2 - texture.height/2 - 40, WHITE)
        DrawRectangleLines(screenWidth/2 - texture.width/2,
                screenHeight/2 - texture.height/2 - 40,
                 texture.width, texture.height, DARKGRAY)

        DrawText("We are drawing only one texture from various images composed!",
                                240, 350, 10, DARKGRAY)
        DrawText("Source images have been cropped, scaled,"+
                        " flipped and copied one over the other.",
                                190, 370, 10, DARKGRAY)

        EndDrawing()
end

UnloadTexture(texture)

CloseWindow()

Screen Shot:

RayLib Example

Image Generation

load "raylib.ring"

NUM_TEXTURES = 7
textures     = list(7)

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
         "raylib [textures] example - procedural images generation")

verticalGradient   = GenImageGradientV(screenWidth, screenHeight, RED, BLUE)
horizontalGradient = GenImageGradientH(screenWidth, screenHeight, RED, BLUE)
radialGradient     = GenImageGradientRadial(screenWidth,
                         screenHeight, 0.0, WHITE, BLACK)
checked            = GenImageChecked(screenWidth, screenHeight,
                         32, 32, RED, BLUE)
whiteNoise         = GenImageWhiteNoise(screenWidth, screenHeight, 0.5)
perlinNoise        = GenImagePerlinNoise(screenWidth, screenHeight, 50, 50, 4.0)
cellular           = GenImageCellular(screenWidth, screenHeight, 32)

textures[NUM_TEXTURES] =  0

textures[1] = LoadTextureFromImage(verticalGradient)
textures[2] = LoadTextureFromImage(horizontalGradient)
textures[3] = LoadTextureFromImage(radialGradient)
textures[4] = LoadTextureFromImage(checked)
textures[5] = LoadTextureFromImage(whiteNoise)
textures[6] = LoadTextureFromImage(perlinNoise)
textures[7] = LoadTextureFromImage(cellular)

UnloadImage(verticalGradient)
UnloadImage(horizontalGradient)
UnloadImage(radialGradient)
UnloadImage(checked)
UnloadImage(whiteNoise)
UnloadImage(perlinNoise)
UnloadImage(cellular)

currentTexture = 1

SetTargetFPS(10)

while !WindowShouldClose()

        if IsMouseButtonPressed(MOUSE_LEFT_BUTTON) || IsKeyPressed(KEY_RIGHT)
                currentTexture++
                if currentTexture > NUM_TEXTURES  currentTexture = 1 ok
        ok

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawTexture(textures[currentTexture], 0, 0, WHITE)

                DrawRectangle(30, 400, 325, 30, Fade(SKYBLUE, 0.5))
                DrawRectangleLines(30, 400, 325, 30, Fade(WHITE, 0.5))
                DrawText("MOUSE LEFT BUTTON to CYCLE PROCEDURAL TEXTURES",
                         40, 410, 10, WHITE)

                switch(currentTexture)
                        on 1  DrawText("VERTICAL GRADIENT", 560, 10, 20, RAYWHITE)
                        on 2  DrawText("HORIZONTAL GRADIENT", 540, 10, 20, RAYWHITE)
                        on 3  DrawText("RADIAL GRADIENT", 580, 10, 20, LIGHTGRAY)
                        on 4  DrawText("CHECKED", 680, 10, 20, RAYWHITE)
                        on 5  DrawText("WHITE NOISE", 640, 10, 20, RED)
                        on 6  DrawText("PERLIN NOISE", 630, 10, 20, RAYWHITE)
                        on 7  DrawText("CELLULAR", 670, 10, 20, RAYWHITE)
                off

        EndDrawing()

end

for i = 1 to  NUM_TEXTURES
        UnloadTexture( textures[i] )
next

CloseWindow()

Screen Shot:

RayLib Example

Texture Source

load "raylib.ring"

screenWidth = 800
screenHeight = 800

InitWindow(screenWidth, screenHeight,
        "raylib [textures] examples - texture source and destination rectangles")

// NOTE: Textures MUST be loaded after Window initialization
// (OpenGL context is required)

scarfy = LoadTexture("RingLogo.png")        // Texture loading

frameWidth = scarfy.width
frameHeight = scarfy.height

// Source rectangle (part of the texture to use for drawing)
sourceRec = Rectangle( 0.0, 0.0, frameWidth, frameHeight )

// Destination rectangle (screen rectangle where drawing part of texture)
destRec = Rectangle( screenWidth/2, screenHeight/2, frameWidth*2, frameHeight*2 )

// Origin of the texture (rotation/scale point)
// it's relative to destination rectangle size
origin = Vector2( frameWidth, frameHeight )

rotation = 0

SetTargetFPS(60)

while !WindowShouldClose()

        rotation = rotation+1

        BeginDrawing()

                ClearBackground(RAYWHITE)

                DrawTexturePro(scarfy, sourceRec, destRec,
                                 origin, rotation, WHITE)

                DrawLine(destRec.x, 0, destRec.x, screenHeight, GRAY)
                DrawLine(0, destRec.y, screenWidth, destRec.y, GRAY)

                DrawText("(c) Scarfy sprite by Eiden Marsal",
                         screenWidth - 200, screenHeight - 20, 10, GRAY)

        EndDrawing()

end

UnloadTexture(scarfy)        // Texture unloading

CloseWindow()

Screen Shot:

RayLib Example

Geometric Shapes

load "raylib.ring"

FOVY_PERSPECTIVE   =  45.0
WIDTH_ORTHOGRAPHIC =  10.0

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
         "raylib [models] example - geometric shapes")

camera = Camera3D(  0.0, 10.0, 10.0,
                                0.0, 0.0, 0.0,
                                0.0, 1.0, 0.0,
                                FOVY_PERSPECTIVE, CAMERA_PERSPECTIVE
                        )

SetTargetFPS(60)

while !WindowShouldClose()

        if IsKeyPressed(KEY_SPACE)

                if camera.type = CAMERA_PERSPECTIVE

                        camera.fovy = WIDTH_ORTHOGRAPHIC
                        camera.type = CAMERA_ORTHOGRAPHIC

                else

                        camera.fovy = FOVY_PERSPECTIVE
                        camera.type = CAMERA_PERSPECTIVE
                ok
        ok

        BeginDrawing()

        ClearBackground(RAYWHITE)

        BeginMode3D(camera)

        DrawCube(Vector3(-4.0, 0.0,  2.0), 2.0, 5.0, 2.0, RED)
        DrawCubeWires(Vector3(-4.0, 0.0,  2.0), 2.0, 5.0, 2.0, GOLD)
        DrawCubeWires(Vector3(-4.0, 0.0, -2.0), 3.0, 6.0, 2.0, MAROON)

        DrawSphere(Vector3(-1.0, 0.0, -2.0), 1.0, GREEN)
        DrawSphereWires(Vector3( 1.0, 0.0,  2.0), 2.0, 16, 16, LIME)

        DrawCylinder(Vector3(4.0, 0.0, -2.0), 1.0, 2.0, 3.0, 4, SKYBLUE)
        DrawCylinderWires(Vector3(4.0, 0.0, -2.0), 1.0, 2.0, 3.0, 4, DARKBLUE)
        DrawCylinderWires(Vector3(4.5, -1.0, 2.0), 1.0, 1.0, 2.0, 6, BROWN)

        DrawCylinder(Vector3(1.0, 0.0, -4.0), 0.0, 1.5, 3.0, 8, GOLD)
        DrawCylinderWires(Vector3(1.0, 0.0, -4.0), 0.0, 1.5, 3.0, 8, PINK)

        DrawGrid(10, 1.0)

        EndMode3D()

        DrawText("Press Spacebar to switch camera type", 10,
                         GetScreenHeight() - 30, 20, DARKGRAY)

        if camera.type = CAMERA_ORTHOGRAPHIC
                DrawText("ORTHOGRAPHIC", 10, 40, 20, BLACK)
        else
                if camera.type = CAMERA_PERSPECTIVE
                        DrawText("PERSPECTIVE", 10, 40, 20, BLACK)
                ok
        ok

        DrawFPS(10, 10)

        EndDrawing()

end

CloseWindow()

Screen Shot:

RayLib Example

Cubic Map

load "raylib.ring"

screenWidth  = 800
screenHeight = 450

InitWindow(screenWidth, screenHeight,
         "raylib [models] example - cubesmap loading and drawing")

camera = Camera3D( 16.0, 14.0, 16.0,
                                 0.0, 0.0, 0.0,
                                 0.0, 1.0, 0.0,
                                 45.0, 0 )

image    = LoadImage("cubicmap.png")
cubicmap = LoadTextureFromImage(image)

mesh     = GenMeshCubicmap(image, Vector3( 1.0, 1.0, 1.0 ))
model    = LoadModelFromMesh(mesh)

texture  = LoadTexture("cubicmap_atlas.png")

setmodelmaterialtexture(model,0,MAP_DIFFUSE,texture)

mapPosition = Vector3( -16.0, 0.0, -8.0 )

UnloadImage(image)
SetCameraMode(camera, CAMERA_ORBITAL)
SetTargetFPS(60)

while !WindowShouldClose()

        UpdateCamera(camera)

        BeginDrawing()

                ClearBackground(RAYWHITE)
                BeginMode3D(camera)
                        DrawModel(model, mapPosition, 1.0, WHITE)
                EndMode3D()

                DrawTextureEx(cubicmap, Vector2( screenWidth -
                                 cubicmap.width*4 - 20, 20 ),
                                                0.0, 4.0, WHITE)
                DrawRectangleLines(screenWidth - cubicmap.width*4 -
                                 20, 20, cubicmap.width*4,
                                cubicmap.height*4, GREEN)

                DrawText("cubicmap image used to", 658,  90, 10, GRAY)
                DrawText("generate map 3d model",  658, 104, 10, GRAY)
                DrawFPS(10, 10)

        EndDrawing()

end

UnloadTexture(cubicmap)
UnloadTexture(texture)
UnloadModel(model)

CloseWindow()

Screen Shot:

RayLib Example

Functions

void InitWindow(int width, int height, const char *title)
bool WindowShouldClose(void)
void CloseWindow(void)
bool IsWindowReady(void)
bool IsWindowMinimized(void)
bool IsWindowResized(void)
bool IsWindowHidden(void)
void ToggleFullscreen(void)
void UnhideWindow(void)
void HideWindow(void)
void SetWindowIcon(Image image)
void SetWindowTitle(const char *title)
void SetWindowPosition(int x, int y)
void SetWindowMonitor(int monitor)
void SetWindowMinSize(int width, int height)
void SetWindowSize(int width, int height)
void *GetWindowHandle(void)
int GetScreenWidth(void)
int GetScreenHeight(void)
int GetMonitorCount(void)
int GetMonitorWidth(int monitor)
int GetMonitorHeight(int monitor)
int GetMonitorPhysicalWidth(int monitor)
int GetMonitorPhysicalHeight(int monitor)
const char *GetMonitorName(int monitor)
const char *GetClipboardText(void)
void SetClipboardText(const char *text)
void ShowCursor(void)
void HideCursor(void)
bool IsCursorHidden(void)
void EnableCursor(void)
void DisableCursor(void)
void ClearBackground(Color color)
void BeginDrawing(void)
void EndDrawing(void)
void BeginMode2D(Camera2D camera)
void EndMode2D(void)
void BeginMode3D(Camera3D camera)
void EndMode3D(void)
void BeginTextureMode(RenderTexture2D target)
void EndTextureMode(void)
Ray GetMouseRay(Vector2 mousePosition, Camera3D camera)
Vector2 GetWorldToScreen(Vector3 position, Camera3D camera)
Matrix GetCameraMatrix(Camera3D camera)
void SetTargetFPS(int fps)
int GetFPS(void)
float GetFrameTime(void)
double GetTime(void)
int ColorToInt(Color color)
Vector4 ColorNormalize(Color color)
Vector3 ColorToHSV(Color color)
Color ColorFromHSV(Vector3 hsv)
Color GetColor(int hexValue)
Color Fade(Color color, float alpha)
void SetConfigFlags(unsigned char flags)
void SetTraceLogLevel(int logType)
void SetTraceLogExit(int logType)
void SetTraceLogCallback(TraceLogCallback callback)
void TraceLog(int logType, const char *text)
void TakeScreenshot(const char *fileName)
int GetRandomValue(int min, int max)
bool FileExists(const char *fileName)
bool IsFileExtension(const char *fileName, const char *ext)
const char *GetExtension(const char *fileName)
const char *GetFileName(const char *filePath)
const char *GetFileNameWithoutExt(const char *filePath)
const char *GetDirectoryPath(const char *fileName)
const char *GetWorkingDirectory(void)
char **GetDirectoryFiles(const char *dirPath, int *count)
void ClearDirectoryFiles(void)
bool ChangeDirectory(const char *dir)
bool IsFileDropped(void)
char **GetDroppedFiles(int *count)
void ClearDroppedFiles(void)
long GetFileModTime(const char *fileName)
void StorageSaveValue(int position, int value)
int StorageLoadValue(int position)
void OpenURL(const char *url)
bool IsKeyPressed(int key)
bool IsKeyDown(int key)
bool IsKeyReleased(int key)
bool IsKeyUp(int key)
int GetKeyPressed(void)
void SetExitKey(int key)
bool IsGamepadAvailable(int gamepad)
bool IsGamepadName(int gamepad, const char *name)
const char *GetGamepadName(int gamepad)
bool IsGamepadButtonPressed(int gamepad, int button)
bool IsGamepadButtonDown(int gamepad, int button)
bool IsGamepadButtonReleased(int gamepad, int button)
bool IsGamepadButtonUp(int gamepad, int button)
int GetGamepadButtonPressed(void)
int GetGamepadAxisCount(int gamepad)
float GetGamepadAxisMovement(int gamepad, int axis)
bool IsMouseButtonPressed(int button)
bool IsMouseButtonDown(int button)
bool IsMouseButtonReleased(int button)
bool IsMouseButtonUp(int button)
int GetMouseX(void)
int GetMouseY(void)
Vector2 GetMousePosition(void)
void SetMousePosition(int x, int y)
void SetMouseOffset(int offsetX, int offsetY)
void SetMouseScale(float scaleX, float scaleY)
int GetMouseWheelMove(void)
int GetTouchX(void)
int GetTouchY(void)
Vector2 GetTouchPosition(int index)
void SetGesturesEnabled(unsigned int gestureFlags)
bool IsGestureDetected(int gesture)
int GetGestureDetected(void)
int GetTouchPointsCount(void)
float GetGestureHoldDuration(void)
Vector2 GetGestureDragVector(void)
float GetGestureDragAngle(void)
Vector2 GetGesturePinchVector(void)
float GetGesturePinchAngle(void)
void SetCameraMode(Camera3D camera, int mode)
void UpdateCamera(Camera3D *camera)
void SetCameraPanControl(int panKey)
void SetCameraAltControl(int altKey)
void SetCameraSmoothZoomControl(int szKey)
void SetCameraMoveControls(int frontKey, int backKey, int rightKey, int leftKey,
         int upKey, int downKey)
void DrawPixel(int posX, int posY, Color color)
void DrawPixelV(Vector2 position, Color color)
void DrawLine(int startPosX, int startPosY, int endPosX, int endPosY, Color color)
void DrawLineV(Vector2 startPos, Vector2 endPos, Color color)
void DrawLineEx(Vector2 startPos, Vector2 endPos, float thick, Color color)
void DrawLineBezier(Vector2 startPos, Vector2 endPos, float thick, Color color)
void DrawLineStrip(Vector2 *points, int numPoints, Color color)
void DrawCircle(int centerX, int centerY, float radius, Color color)
void DrawCircleSector(Vector2 center, float radius, int startAngle, int endAngle,
         int segments, Color color)
void DrawCircleSectorLines(Vector2 center, float radius, int startAngle,
        int endAngle, int segments, Color color)
void DrawCircleGradient(int centerX, int centerY, float radius,
        Color color1, Color color2)
void DrawCircleV(Vector2 center, float radius, Color color)
void DrawCircleLines(int centerX, int centerY, float radius, Color color)
void DrawRing(Vector2 center, float innerRadius, float outerRadius,
         int startAngle, int endAngle, int segments, Color color)
void DrawRingLines(Vector2 center, float innerRadius, float outerRadius,
         int startAngle, int endAngle, int segments, Color color)
void DrawRectangle(int posX, int posY, int width, int height, Color color)
void DrawRectangleV(Vector2 position, Vector2 size, Color color)
void DrawRectangleRec(Rectangle rec, Color color)
void DrawRectanglePro(Rectangle rec, Vector2 origin,
        float rotation, Color color)
void DrawRectangleGradientV(int posX, int posY, int width,
        int height, Color color1, Color color2)
void DrawRectangleGradientH(int posX, int posY, int width,
        int height, Color color1, Color color2)
void DrawRectangleGradientEx(Rectangle rec, Color col1,
        Color col2, Color col3, Color col4)
void DrawRectangleLines(int posX, int posY, int width,
        int height, Color color)
void DrawRectangleLinesEx(Rectangle rec, int lineThick, Color color)
void DrawRectangleRounded(Rectangle rec, float roundness,
        int segments, Color color)
void DrawRectangleRoundedLines(Rectangle rec, float roundness,
        int segments, int lineThick, Color color)
void DrawTriangle(Vector2 v1, Vector2 v2, Vector2 v3, Color color)
void DrawTriangleLines(Vector2 v1, Vector2 v2, Vector2 v3, Color color)
void DrawTriangleFan(Vector2 *points, int numPoints, Color color)
void DrawPoly(Vector2 center, int sides, float radius,
        float rotation, Color color)
void SetShapesTexture(Texture2D texture, Rectangle source)
bool CheckCollisionRecs(Rectangle rec1, Rectangle rec2)
bool CheckCollisionCircles(Vector2 center1, float radius1,
        Vector2 center2, float radius2)
bool CheckCollisionCircleRec(Vector2 center, float radius,
        Rectangle rec)
Rectangle GetCollisionRec(Rectangle rec1, Rectangle rec2)
bool CheckCollisionPointRec(Vector2 point, Rectangle rec)
bool CheckCollisionPointCircle(Vector2 point, Vector2 center, float radius)
bool CheckCollisionPointTriangle(Vector2 point, Vector2 p1,
        Vector2 p2, Vector2 p3)
Image LoadImage(const char *fileName)
Image LoadImageEx(Color *pixels, int width, int height)
Image LoadImagePro(void *data, int width, int height, int format)
Image LoadImageRaw(const char *fileName, int width, int height,
        int format, int headerSize)
void ExportImage(Image image, const char *fileName)
void ExportImageAsCode(Image image, const char *fileName)
Texture2D LoadTexture(const char *fileName)
Texture2D LoadTextureFromImage(Image image)
TextureCubemap LoadTextureCubemap(Image image, int layoutType)
RenderTexture2D LoadRenderTexture(int width, int height)
void UnloadImage(Image image)
void UnloadTexture(Texture2D texture)
void UnloadRenderTexture(RenderTexture2D target)
Color *GetImageData(Image image)
Vector4 *GetImageDataNormalized(Image image)
int GetPixelDataSize(int width, int height, int format)
Image GetTextureData(Texture2D texture)
Image GetScreenData(void)
void UpdateTexture(Texture2D texture, const void *pixels)
Image ImageCopy(Image image)
void ImageToPOT(Image *image, Color fillColor)
void ImageFormat(Image *image, int newFormat)
void ImageAlphaMask(Image *image, Image alphaMask)
void ImageAlphaClear(Image *image, Color color, float threshold)
void ImageAlphaCrop(Image *image, float threshold)
void ImageAlphaPremultiply(Image *image)
void ImageCrop(Image *image, Rectangle crop)
void ImageResize(Image *image, int newWidth, int newHeight)
void ImageResizeNN(Image *image, int newWidth,int newHeight)
void ImageResizeCanvas(Image *image, int newWidth, int newHeight,
        int offsetX, int offsetY, Color color)
void ImageMipmaps(Image *image)
void ImageDither(Image *image, int rBpp, int gBpp, int bBpp, int aBpp)
Color *ImageExtractPalette(Image image, int maxPaletteSize, int *extractCount)
Image ImageText(const char *text, int fontSize, Color color)
Image ImageTextEx(Font font, const char *text, float fontSize,
        float spacing, Color tint)
void ImageDraw(Image *dst, Image src, Rectangle srcRec, Rectangle dstRec)
void ImageDrawRectangle(Image *dst, Rectangle rec, Color color)
void ImageDrawRectangleLines(Image *dst, Rectangle rec, int thick, Color color)
void ImageDrawText(Image *dst, Vector2 position, const char *text,
        int fontSize, Color color)
void ImageDrawTextEx(Image *dst, Vector2 position, Font font,
        const char *text, float fontSize, float spacing, Color color)
void ImageFlipVertical(Image *image)
void ImageFlipHorizontal(Image *image)
void ImageRotateCW(Image *image)
void ImageRotateCCW(Image *image)
void ImageColorTint(Image *image, Color color)
void ImageColorInvert(Image *image)
void ImageColorGrayscale(Image *image)
void ImageColorContrast(Image *image, float contrast)
void ImageColorBrightness(Image *image, int brightness)
void ImageColorReplace(Image *image, Color color, Color replace)
Image GenImageColor(int width, int height, Color color)
Image GenImageGradientV(int width, int height, Color top, Color bottom)
Image GenImageGradientH(int width, int height, Color left, Color right)
Image GenImageGradientRadial(int width, int height, float density,
        Color inner, Color outer)
Image GenImageChecked(int width, int height, int checksX, int checksY,
        Color col1, Color col2)
Image GenImageWhiteNoise(int width, int height, float factor)
Image GenImagePerlinNoise(int width, int height, int offsetX,
        int offsetY, float scale)
Image GenImageCellular(int width, int height, int tileSize)
void GenTextureMipmaps(Texture2D *texture)
void SetTextureFilter(Texture2D texture, int filterMode)
void SetTextureWrap(Texture2D texture, int wrapMode)
void DrawTexture(Texture2D texture, int posX, int posY, Color tint)
void DrawTextureV(Texture2D texture, Vector2 position, Color tint)
void DrawTextureEx(Texture2D texture, Vector2 position,
        float rotation, float scale, Color tint)
void DrawTextureRec(Texture2D texture, Rectangle sourceRec,
        Vector2 position, Color tint)
void DrawTextureQuad(Texture2D texture, Vector2 tiling, Vector2 offset,
        Rectangle quad, Color tint)
void DrawTexturePro(Texture2D texture, Rectangle sourceRec,
        Rectangle destRec, Vector2 origin, float rotation, Color tint)
void DrawTextureNPatch(Texture2D texture, NPatchInfo nPatchInfo,
        Rectangle destRec, Vector2 origin, float rotation, Color tint)
Font GetFontDefault(void)
Font LoadFont(const char *fileName)
Font LoadFontEx(const char *fileName, int fontSize,
        int *fontChars, int charsCount)
Font LoadFontFromImage(Image image, Color key, int firstChar)
CharInfo *LoadFontData(const char *fileName, int fontSize,
        int *fontChars, int charsCount, int type)
Image GenImageFontAtlas(CharInfo *chars, int charsCount,
        int fontSize, int padding, int packMethod)
void UnloadFont(Font font)
void DrawFPS(int posX, int posY)
void DrawText(const char *text, int posX, int posY, int fontSize, Color color)
void DrawTextEx(Font font, const char *text, Vector2 position,
        float fontSize, float spacing, Color tint)
void DrawTextRec(Font font, const char *text, Rectangle rec,
        float fontSize, float spacing, bool wordWrap, Color tint)
void DrawTextRecEx(Font font, const char *text, Rectangle rec,
        float fontSize, float spacing, bool wordWrap, Color tint,
        int selectStart, int selectLength, Color selectText, Color selectBack)
int MeasureText(const char *text, int fontSize)
Vector2 MeasureTextEx(Font font, const char *text,
        float fontSize, float spacing)
int GetGlyphIndex(Font font, int character)
int GetNextCodepoint(const char *text, int *count)
bool TextIsEqual(const char *text1, const char *text2)
unsigned int TextLength(const char *text)
unsigned int TextCountCodepoints(const char *text)
const char *TextFormat(const char *text)
const char *TextSubtext(const char *text, int position, int length)
const char *TextReplace(char *text, const char *replace, const char *by)
const char *TextInsert(const char *text, const char *insert, int position)
const char *TextJoin(const char **textList, int count, const char *delimiter)
const char **TextSplit(const char *text, char delimiter, int *count)
void TextAppend(char *text, const char *append, int *position)
int TextFindIndex(const char *text, const char *find)
const char *TextToUpper(const char *text)
const char *TextToLower(const char *text)
const char *TextToPascal(const char *text)
int TextToInteger(const char *text)
void DrawLine3D(Vector3 startPos, Vector3 endPos, Color color)
void DrawCircle3D(Vector3 center, float radius, Vector3 rotationAxis,
float rotationAngle, Color color)
void DrawCube(Vector3 position, float width, float height, float length, Color color)
void DrawCubeV(Vector3 position, Vector3 size, Color color)
void DrawCubeWires(Vector3 position, float width, float height,
        float length, Color color)
void DrawCubeWiresV(Vector3 position, Vector3 size, Color color)
void DrawCubeTexture(Texture2D texture, Vector3 position,
        float width, float height, float length, Color color)
void DrawSphere(Vector3 centerPos, float radius, Color color)
void DrawSphereEx(Vector3 centerPos, float radius, int rings,
        int slices, Color color)
void DrawSphereWires(Vector3 centerPos, float radius, int rings,
        int slices, Color color)
void DrawCylinder(Vector3 position, float radiusTop, float radiusBottom,
        float height, int slices, Color color)
void DrawCylinderWires(Vector3 position, float radiusTop,
        float radiusBottom, float height, int slices, Color color)
void DrawPlane(Vector3 centerPos, Vector2 size, Color color)
void DrawRay(Ray ray, Color color)
void DrawGrid(int slices, float spacing)
void DrawGizmo(Vector3 position)
Model LoadModel(const char *fileName)
Model LoadModelFromMesh(Mesh mesh)
void UnloadModel(Model model)
Mesh *LoadMeshes(const char *fileName, int *meshCount)
void ExportMesh(Mesh mesh, const char *fileName)
void UnloadMesh(Mesh *mesh)
Material *LoadMaterials(const char *fileName, int *materialCount)
Material LoadMaterialDefault(void)
void UnloadMaterial(Material material)
void SetMaterialTexture(Material *material, int mapType, Texture2D texture)
void SetModelMeshMaterial(Model *model, int meshId, int materialId)
ModelAnimation *LoadModelAnimations(const char *fileName, int *animsCount)
void UpdateModelAnimation(Model model, ModelAnimation anim, int frame)
void UnloadModelAnimation(ModelAnimation anim)
bool IsModelAnimationValid(Model model, ModelAnimation anim)
Mesh GenMeshPoly(int sides, float radius)
Mesh GenMeshPlane(float width, float length, int resX, int resZ)
Mesh GenMeshCube(float width, float height, float length)
Mesh GenMeshSphere(float radius, int rings, int slices)
Mesh GenMeshHemiSphere(float radius, int rings, int slices)
Mesh GenMeshCylinder(float radius, float height, int slices)
Mesh GenMeshTorus(float radius, float size, int radSeg, int sides)
Mesh GenMeshKnot(float radius, float size, int radSeg, int sides)
Mesh GenMeshHeightmap(Image heightmap, Vector3 size)
Mesh GenMeshCubicmap(Image cubicmap, Vector3 cubeSize)
BoundingBox MeshBoundingBox(Mesh mesh)
void MeshTangents(Mesh *mesh)
void MeshBinormals(Mesh *mesh)
void DrawModel(Model model, Vector3 position, float scale, Color tint)
void DrawModelEx(Model model, Vector3 position, Vector3 rotationAxis,
        float rotationAngle, Vector3 scale, Color tint)
void DrawModelWires(Model model, Vector3 position, float scale, Color tint)
void DrawModelWiresEx(Model model, Vector3 position,
        Vector3 rotationAxis, float rotationAngle, Vector3 scale, Color tint)
void DrawBoundingBox(BoundingBox box, Color color)
void DrawBillboard(Camera3D camera, Texture2D texture,
        Vector3 center, float size, Color tint)
void DrawBillboardRec(Camera3D camera, Texture2D texture,
        Rectangle sourceRec, Vector3 center, float size, Color tint)
bool CheckCollisionSpheres(Vector3 centerA, float radiusA,
        Vector3 centerB, float radiusB)
bool CheckCollisionBoxes(BoundingBox box1, BoundingBox box2)
bool CheckCollisionBoxSphere(BoundingBox box, Vector3 centerSphere, float radiusSphere)
bool CheckCollisionRaySphere(Ray ray, Vector3 spherePosition, float sphereRadius)
bool CheckCollisionRaySphereEx(Ray ray, Vector3 spherePosition,
        float sphereRadius, Vector3 *collisionPoint)
bool CheckCollisionRayBox(Ray ray, BoundingBox box)
RayHitInfo GetCollisionRayModel(Ray ray, Model *model)
RayHitInfo GetCollisionRayTriangle(Ray ray, Vector3 p1, Vector3 p2, Vector3 p3)
RayHitInfo GetCollisionRayGround(Ray ray, float groundHeight)
char *LoadText(const char *fileName)
Shader LoadShader(const char *vsFileName, const char *fsFileName)
Shader LoadShaderCode(char *vsCode, char *fsCode)
void UnloadShader(Shader shader)
Shader GetShaderDefault(void)
Texture2D GetTextureDefault(void)
int GetShaderLocation(Shader shader, const char *uniformName)
void SetShaderValue(Shader shader, int uniformLoc,
        const void *value, int uniformType)
void SetShaderValueV(Shader shader, int uniformLoc,
        const void *value, int uniformType, int count)
void SetShaderValueMatrix(Shader shader, int uniformLoc, Matrix mat)
void SetShaderValueTexture(Shader shader, int uniformLoc, Texture2D texture)
void SetMatrixProjection(Matrix proj)
void SetMatrixModelview(Matrix view)
Matrix GetMatrixModelview(void)
Texture2D GenTextureCubemap(Shader shader, Texture2D skyHDR, int size)
Texture2D GenTextureIrradiance(Shader shader, Texture2D cubemap, int size)
Texture2D GenTexturePrefilter(Shader shader, Texture2D cubemap, int size)
Texture2D GenTextureBRDF(Shader shader, int size)
void BeginShaderMode(Shader shader)
void EndShaderMode(void)
void BeginBlendMode(int mode)
void EndBlendMode(void)
void BeginScissorMode(int x, int y, int width, int height)
void EndScissorMode(void)
void InitVrSimulator(void)
void CloseVrSimulator(void)
void UpdateVrTracking(Camera3D *camera)
void SetVrConfiguration(VrDeviceInfo info, Shader distortion)
bool IsVrSimulatorReady(void)
void ToggleVrMode(void)
void BeginVrDrawing(void)
void EndVrDrawing(void)
void InitAudioDevice(void)
void CloseAudioDevice(void)
bool IsAudioDeviceReady(void)
void SetMasterVolume(float volume)
Wave LoadWave(const char *fileName)
Wave LoadWaveEx(void *data, int sampleCount, int sampleRate,
        int sampleSize, int channels)
Sound LoadSound(const char *fileName)
Sound LoadSoundFromWave(Wave wave)
void UpdateSound(Sound sound, const void *data, int samplesCount)
void UnloadWave(Wave wave)
void UnloadSound(Sound sound)
void ExportWave(Wave wave, const char *fileName)
void ExportWaveAsCode(Wave wave, const char *fileName)
void PlaySound(Sound sound)
void PauseSound(Sound sound)
void ResumeSound(Sound sound)
void StopSound(Sound sound)
bool IsSoundPlaying(Sound sound)
void SetSoundVolume(Sound sound, float volume)
void SetSoundPitch(Sound sound, float pitch)
void WaveFormat(Wave *wave, int sampleRate, int sampleSize, int channels)
Wave WaveCopy(Wave wave)
void WaveCrop(Wave *wave, int initSample, int finalSample)
float *GetWaveData(Wave wave)
Music LoadMusicStream(const char *fileName)
void UnloadMusicStream(Music music)
void PlayMusicStream(Music music)
void UpdateMusicStream(Music music)
void StopMusicStream(Music music)
void PauseMusicStream(Music music)
void ResumeMusicStream(Music music)
bool IsMusicPlaying(Music music)
void SetMusicVolume(Music music, float volume)
void SetMusicPitch(Music music, float pitch)
void SetMusicLoopCount(Music music, int count)
float GetMusicTimeLength(Music music)
float GetMusicTimePlayed(Music music)
AudioStream InitAudioStream(unsigned int sampleRate,
        unsigned int sampleSize, unsigned int channels)
void UpdateAudioStream(AudioStream stream, const void *data, int samplesCount)
void CloseAudioStream(AudioStream stream)
bool IsAudioBufferProcessed(AudioStream stream)
void PlayAudioStream(AudioStream stream)
void PauseAudioStream(AudioStream stream)
void ResumeAudioStream(AudioStream stream)
bool IsAudioStreamPlaying(AudioStream stream)
void StopAudioStream(AudioStream stream)
void SetAudioStreamVolume(AudioStream stream, float volume)
void SetAudioStreamPitch(AudioStream stream, float pitch)
void GuiEnable(void)
void GuiDisable(void)
void GuiLock(void)
void GuiUnlock(void)
void GuiState(int state)
void GuiFont(Font font)
void GuiFade(float alpha)
void GuiSetStyle(int control, int property, int value)
int GuiGetStyle(int control, int property)
bool GuiWindowBox(Rectangle bounds, const char *text)
void GuiGroupBox(Rectangle bounds, const char *text)
void GuiLine(Rectangle bounds, const char *text)
void GuiPanel(Rectangle bounds)
Rectangle GuiScrollPanel(Rectangle bounds, Rectangle content, Vector2 *scroll)
void GuiLabel(Rectangle bounds, const char *text)
bool GuiButton(Rectangle bounds, const char *text)
bool GuiLabelButton(Rectangle bounds, const char *text)
bool GuiImageButton(Rectangle bounds, Texture2D texture)
bool GuiImageButtonEx(Rectangle bounds, Texture2D texture,
        Rectangle texSource, const char *text)
bool GuiToggle(Rectangle bounds, const char *text, bool active)
int GuiToggleGroup(Rectangle bounds, const char *text, int active)
bool GuiCheckBox(Rectangle bounds, const char *text, bool checked)
int GuiComboBox(Rectangle bounds, const char *text, int active)=
bool GuiDropdownBox(Rectangle bounds, const char *text,
        int *active, bool editMode)
bool GuiSpinner(Rectangle bounds, int *value, int minValue,
        int maxValue, bool editMode)
bool GuiValueBox(Rectangle bounds, int *value, int minValue,
        int maxValue, bool editMode)
bool GuiTextBox(Rectangle bounds, char *text, int textSize, bool editMode)
bool GuiTextBoxMulti(Rectangle bounds, char *text, int textSize, bool editMode)
float GuiSlider(Rectangle bounds, const char *text, float value,
        float minValue, float maxValue, bool showValue)
float GuiSliderBar(Rectangle bounds, const char *text, float value,
        float minValue, float maxValue, bool showValue)
float GuiProgressBar(Rectangle bounds, const char *text, float value,
        float minValue, float maxValue, bool showValue)
void GuiStatusBar(Rectangle bounds, const char *text)
void GuiDummyRec(Rectangle bounds, const char *text)
int GuiScrollBar(Rectangle bounds, int value, int minValue, int maxValue)
Vector2 GuiGrid(Rectangle bounds, float spacing, int subdivs)
bool GuiListView(Rectangle bounds, const char *text, int *active,
        int *scrollIndex, bool editMode)
bool GuiListViewEx(Rectangle bounds, const char **text, int count,
        int *enabled, int *active, int *focus, int *scrollIndex, bool editMode)
int GuiMessageBox(Rectangle bounds, const char *windowTitle,
        const char *message, const char *buttons)
int GuiTextInputBox(Rectangle bounds, const char *windowTitle,
        const char *message, char *text, const char *buttons)
Color GuiColorPicker(Rectangle bounds, Color color)
void GuiLoadStyle(const char *fileName)
void GuiLoadStyleProps(const int *props, int count)
void GuiLoadStyleDefault(void)
void GuiUpdateStyleComplete(void)
const char *GuiIconText(int iconId, const char *text)

More Functions

The next functions are added by the RingRayLib extension

* SetShaderInt(shader, Location, nValue)
* SetShaderFloat(shader, Location, nValue)
* SetShaderVec2(shader, Location, aValue)
* SetShaderVec3(shader, Location, aValue)
* SetShaderVec4(shader, Location, aValue)
* SetShaderIVec2(shader, Location, aValue)
* SetShaderIVec3(shader, Location, aValue)
* SetShaderIVec4(shader, Location, aValue)
* SetModelMaterialShader(model, nID, shader)
* vec2() --> Vector2
* vec2set(Vector 2,double x, double y)
* vec2getx() --> double
* vec2setx(double)
* vec2gety() --> double
* vec2sety(double)
* vec3() --> Vector3
* vec3set(Vector 3,double x, double y,double z)
* vec3getx() --> double
* vec3setx(double)
* vec3gety() --> double
* vec3sety(double)
* vec3getz() --> double
* vec3setz(double)
* vec4() --> Vector4
* vec4set(Vector 4,double x, double y,double z,double w)
* vec4getx() --> double
* vec4setx(double)
* vec4gety() --> double
* vec4sety(double)
* vec4getz() --> double
* vec4setz(double)
* vec4getw() --> double
* vec4setw(double)
* getcamera3dposx() --> double
* setcamera3dposx(double)
* getcamera3dposy() --> double
* setcamera3dposy(double)
* getcamera3dposz() --> double
* setcamera3dposz(double)
* getcamera3dtarx() --> double
* setcamera3dtarx(double)
* getcamera3dtary() --> double
* setcamera3dtary(double)
* getcamera3dtarz() --> double
* setcamera3dtarz(double)
* getcamera3dupx() --> double
* setcamera3dupx(double)
* getcamera3dupy() --> double
* setcamera3dupy(double)
* getcamera3dupz() --> double
* setcamera3dupz(double)
* getcamera3fovy() --> double
* setcamera3fovy(double)
* getcamera3type() --> double
* setcamera3type(double)